2
Loosen the knob on either rear side of dolly.
Insert both Handle Bar together & tighten the
knobs to secure them.
Spin Dolly
Setup
Insert push bar handle into Rear-Wheel
Steering and lock it with the provided pin.
Hold hex nut with 13mm wrench & loosen the
steering rod bolt with 4mm allen key to
remove the allen bolt from dolly.
Then remove the bolt (as shown) with the
help of 10mm allen key and detach the front
section of dolly.
Remove bolts on Pneumatic wheels with
provided 4mm allen key and detach the
wheels.
Converting 4x4 Steering into 2x2
Insert the wheel axle in dolly & screw it
tightly. Then attach the wheel and tighten it
properly.
