4
Loosen knob on top located on the back
(operator) side of jib. Then take out the side
knob.
Insert Counterweight Rod through the holes
and lock the knob on top. Then add weights
(Not Included)
to both the Rods as per the
requirement and secure them with Locking
Pin.
Loosen
the
knob
on
Adjustment
Counterweight and slide it to ensure right
balance of jib, as shown in image.
Loosen side knob on the front (camera) side
of jib and the red button knob on Rod, to
remove the camera mounting section.
Now loosen bottom knob on the front
(camera) side of jib and press the small red
button on side to release (pull-out) the
Telescopic Section.
Pull out the Telescopic Section from back
(operator) side of jib. Insert the side knob
again to lock it.
