PROAIM Airwave Vibration Isolator Arm Page 2 Assembly Manual Download

Page: 2 / 4



Loosen Pole Clamps via knobs. Insert a pole
into clamps and tighten them properly.



Attach Isolator onto the nose bracket of
Airwave Arm with help of bolts. Then tighten
these bolts with allen key.

Airwave Arm

Setup

NOTE:

Nose Bracket can be adjusted on two

levels, top and bottom, as shown in image.

NOTE:

Nose Plate can also be mounted in the

opposite direction.



Loosen springs to decrease the weighing
capacity & tighten them to increase the
weighing capacity.

Spring Adjustment

NOTE:

Load Capacity can be easily adjusted by adjusting springs. Adjust both springs equally.

Summary of Contents for Airwave Vibration Isolator Arm

Page 1: ...reproduced stored in a retrieval system or transmitted by any form or by any means electronic mechanical photo copying recording or otherwise except as may be expressly permitted by the applicable cop...

Page 2: ...with allen key Airwave Arm Setup NOTE Nose Bracket can be adjusted on two levels top and bottom as shown in image NOTE Nose Plate can also be mounted in the opposite direction Loosen springs to decrea...

Page 3: ...Spring Tension evenly turn the adjustment knob If the arm is too soft and moves up down many times turn it towards direction of H Hard If the arm is rigid turn it towards the direction of S Soft In o...

Page 4: ...n costs nor does it cover a product subjected to misuse or accidental damage Warranty repairs are subjected to inspection and evaluation by us Liability We are not liable for damage caused by products...