3
With arm at levelled position or slightly
above the horizontal position, push down
the front of arm. It moves 3 to 4 times
before reaching normal position.
NOTE:
It is very important to check the movement of arm.
In order to smoothen Spring Tension evenly,
turn the adjustment knob. If the arm is too
soft and moves up & down many times, turn
it towards direction of H (Hard). If the arm is
rigid turn it towards the direction of S (Soft).
In order to mount Ronin setup without
Isolator, attach Ronin Plate onto the Nose as
shown in image.
Ronin can be easily attached onto Isolator
with 1/4”-20 and 3/8”-16 threads. Then lock
the Ronin plate.
Attaching the Ronin
Ronin Interface
