Proactive - TheraHeat
16
Preparing Your Device
It is necessary to prepare and assemble
your device prior to treatment.
NOTE: Save the plastic film for storage
after treatment to protect the pads
from dirt and debris.
1. While the stimulator device is
OFF (the display is NOT illuminated)
carefully attach the electrode pads
to the control unit via the magnetic
connection points.
2. Pull gently to ensure the electrode
pad is firmly attached.
3. Carefully remove the plastic
film from the electrode pad.
4. You are ready to apply the pad
to the affected treatment area.
Do not turn the power ON until the
device is in place on the user’s skin as
indicated in the ‘Instructions for Use’
section of this manual.
When connecting the
pad, match the silver to
silver, and gold to gold
connection points.
Silver
Gold
Summary of Contents for TheraHeat 715-440
Page 37: ...Proactive TheraHeat 35 Notes...
Page 38: ...Proactive TheraHeat 36 Notes...
Page 39: ...Proactive TheraHeat 37 Notes...
