Operating instruction RAPTOR 4all & 4you
23
Figure 52: Pack size: Chassis and drive unit
separated and running wheels removed
24 Storage
Store the product on an easy to clean surface
in a dry environment, preferably at room
temperature (+15°C to +25°C).
For storage please also comply with the notes
in other sections of these operating instructions
and the component manufacturers' operating
instructions included with delivery.
If the product is not used or is stored over
a longer period, if necessary, before using it
again, we recommend having a dealer give it a
general function and safety check.
25 Transport
When loading or transporting, the product can
be held on the pedal bearing support and
product frame.
The product and all associated
components must be secured during transport
so that they are not damaged (e.g. by falling
over) and do not become a hazard to persons
or other products.
When loading make sure that the cables
and lines are not caught up, become kinked or
otherwise damaged. The product may not be
used with damaged cables and / or lines.
26 Malfunctions
In the event of any malfunctions which cannot
be solved by yourself based on the operating
instructions included in the scope of delivery,
please contact your specialist retailer or
PRO ACTIV directly.
Malfunctions must be solved before any
further use or, if they occur during the journey,
this must be interrupted immediately.
27 Cleaning and care
Regular cleaning of the product is prescribed
to prevent the components becoming clogged
up due to dirt. Moreover, regular cleaning
prevents corrosion and increased wear. In
particular, the product should be carefully
cleaned after every major use, e.g. summer or
winter holidays.
To avoid corrosion and therefore malfunctions
or breakages of components, the product may
not be exposed to any aggressive
environmental influences. If this cannot be
avoided, the product should be cleaned
immediately after such use and moving parts
need to be greased.
For all cleaning processes, only use
commercially available, household cleaning
agents. Do not use any abrasive cleaning
agents or aggressive, acidic cleaners, to
prevent scratching or fading of the coating or
the anodised parts.
In case the product becomes wet when using,
dry it after use.
The drive wheel should be regularly cleared of
contamination. It is recommended that you use
a soft sponge or a soft brush. The quick
release axles should be cleaned approx. every
8 weeks and lubricated with a little lubricating
oil with high corrosion protection properties
(e.g., Neoval MTO 300).
Use only water and soap to clean the seat
upholstery.
