Usage instructions for NJ1 adaptive bike
24
3. Objects that are installed to the product,
but do not belong to the product, must be
removed and securely stowed.
4. Secure the product with lashing straps. To
do this, use the existing securing devices
in the vehicle.
After securing, the product may not roll,
slip or tip over to the side any more.
The lashing straps used to secure the
product in the transport vehicle may only be
fitted to the components of the vehicle provid-
ed for that purpose and onto the bottom brack-
et support of the product.
Do not transport the product on the front
passenger seat. The product could slip and
impede the driver.
When loading and securing, make sure
that the cables and lines do not get tangled,
become kinked or otherwise damaged. The
product may not be used with damaged cables
and/or lines.
22 Malfunctions
In the event of malfunctions that cannot be
repaired by yourself based on the usage in-
structions included in the scope of delivery,
please contact your rehabilitation specialist
dealer or PRO ACTIV directly.
Malfunctions must be repaired before any
further use or, if they occur during the trip, it
must be interrupted immediately.
All serious incidents that have occurred in con-
nection with the product must be reported to
the manufacturer and the responsible authority
in the state in which the user resides.
23 Cleaning and care
Regular cleaning of the product is prescribed
to prevent the components from becoming stiff
due to soiling. In particular, the product should
be carefully cleaned after every major use, e.g.
summer or winter holidays.
To avoid corrosion and therefore malfunctions
or breakages of components, the product may
not be exposed to any aggressive environmen-
tal influences. If this cannot be avoided, the
product should be cleaned immediately after
such use and moving parts need to be
greased. Regular cleaning prevents corrosion
and increased wear.
In case the product becomes wet when using,
please dry it after use.
Clean your product with water, solvent or
neutral cleaning agents. Do not use any abra-
sive cleaning agents or aggressive, acidic
cleaners when cleaning.
The drive wheel should be regularly cleared of
contamination. It is recommended that you use
a soft sponge or a soft brush.
The product must not be cleaned using
steam or high pressure.
Recommended care:
If you need care products for your product,
please contact PRO ACTIV.
24 Maintenance
24.1 General instructions
The product is not a maintenance-free device.
Therefore, please observe the following in-
structions about maintenance.
If repairs are required or there are any
defects on your product, you should contact
your rehabilitation specialist dealer or
PRO ACTIV before using it again and have the
defect remedied in the interests of your own
safety. Screws and other elements need to be
secured properly again after repairs.
For tyres with tread: As soon as there is
one or more points with less than 1 mm of
tread on the product or the adapted wheel-
chair, the tyres must be changed since other-
wise there is an increased risk of an accident.
