NOTICE: The build number of ST24 should be B94 or above. The user can view the
build number in the “About Device” column.
LED STATUS INDICATION
PROACTION™ (Control Status Indication)
Boot Self-inspection: LED blinking red and blue alternately
Double Hands Operating: LED solid red
Single Hand Gimbal Gripping: LED solid blue
PROACTION™ (Power Status Indication)
First Level Low Voltage Battery Warning: LED blinking green slowly
Second Level Low Voltage Battery Warning: LED blinking green quickly
CGO4 (CAMERA)
ST24 and gimbal camera not connected: LED blinking green.
ST24 and mobile device connected: LED blinking blue
CGO4 Wi-Fi malfunction: LED blinking red
CGO4 (GIMBAL)
Firmware update in progress: LED blinking blue
Firmware update succeeds: LED blinking green
Firmware update Fails: LED blinking red
Powering On: LED solid blue for 7 seconds
Initializing: LED blinking blue and green alternately
Connecting Between the Gimbal and Aircraft Fails:
In the Follow Mode: LED blinking green
In the Global Mode: LED blinking blue
NOTICE: We suggest that the user restart H920/ProAction in such conditions.
Connecting Between the Gimbal and Aircraft Succeeds:
In the Follow Mode: LED solid green
In the Global Mode: LED solid blue
CGO4 (RECEIVER)
Receiver and ST24 connected: LED blinking orange ( 2 times per second)
Receiver binding to ST24: LED solid orange
Signal loss: LED blinking orange (1 flash per second)
Summary of Contents for CG04
Page 1: ...V12242015...
