4. Hook on the DC power (please note ,
it is very important to use the same rating
of DC Power adaptor as included,
wrong rating or input voltage will
cause unit to be destroyed ,
fire or even serious injuring)
Operation
1. When you connection was ready, Please switch the slide switch on the front panel to
power on the unit.
2. Channel Setting: you can select the output channel by the CH +/- down to select the
channel that you want(from CH21 to CH69 ), there are two 7 segment LEDs on the top
panel will show the channel been selected.
3. Please choose the un-used channel for you operation. If you did not use the un-used
channel, you will experience the distorted image and noisy sound.
Specifications:
RF
Input 45~862MHz
Input Connector
F Female,75 Ohm
Output (RFD-2169BF)
CH 21-69
Output(combined)
45~862MHz
Output connector
F Female,75 Ohm
Video & Audio
Input RCA/SCART
Output SCART(Loop
Through)
Video Input impedance
75~1.3K ohm
Video S/N
40dB min
Audio Input impedance
10K Ohm
Powering
9V DC
Accessories:
AC Adaptor x 1
240VAC (9V DC @ 200mA)
RF Cable
F Male IEC Female @1M
Warning :
Keep the unit away form heat.
Indoor use only, in a dry and clean environment
Do not use the unit in humid room.
Do not open the unit .
Repairs should only be carried out by a qualified technician
Cable/Antenna Input
To TV
Power
Input
RCA Input