14
English
Troubleshooting
*When the device is used longer than noted on the control panel “HOT” indicator will light.
**When the bin is not pushed against the stop “BIN” indicator will light.
*** When the engine is overheated “HOT” indicator will light.
If none of the above applies and the equipment still does not run, please contact the appropriate
customer service centre.
Failure
Reason
Solution
Power indicator does not light
Power cord is not connected to the
mains.
Connect power cord to the mains.
Power switch is not in “AUTO”
position.
Turn power switch to “AUTO” position.
Power indicator is lit but the motor
does not start.
Waste waste bin is overfilled*
Empty the bin
Waste bin is not pushed in up to the
end**
Push in waste bin up to the end
The motor is overheated***
Switch off power and continue
operation not earlier than in 30 min.
Shredder runs continuously
Start sensor of receiving chute may be
clogged with paper.
Clear the paper blockage at the auto
start sensor (center) location .
The motor works, but the paper is not
captured
The paper was not inserted properly.
Insert the paper against the stop
Summary of Contents for KGB 4006CC
