Pro 8318 WB, User Manual

Page: 9 / 17

User select weight, the last input value display on dot matrix,
“
Weight
”
displayed among the numbers,
press
“
+
”
or
“
-
”
key to adjust the value, then press Enter key to confirm.
User enter into exercise time. The last input time is the default value displayed on dot matrix.
“
Time
”
displayed above the numbers, then press Enter key to confirm the exercise time and system begin running.
Program select:
P1-MANUAL
P2-ROLLING HILLS
P3-RIDE IN THE PARK
P4-SPEED INTERVALS
P5-STRENGTH TRAIN
P6-CLIMB MOUNTAIN
P7-MOUNTAIN RUN
P8-FITNESS TEST
C1-CUSTOMER ONE
C2-CUSTOMER TWO
HC-HRC-HEART RATE
Exercise mode
The section number of program divide evenly the running time, it results in the segment time.(For
example:30:00/30 section=1:00 segment time).
Computer with 16 grade resistance system.
Direction scroll from right to left, the running section flash on the LED line. As the section less than 24, the
right part of doxt matrix will begin to vanish unitl there is no remaining section.
During program operation period, if the resistance grade is changed, the resistance grade will be averaged.
But the direction of dot matrix would not change.
When the time of clock reach 00:00,
“
Finish“ will be displayed with beep 4 times. If under FITNESS TEST
mode,after display “FILISH”
，
it will display the result grade of exercise stage, such as “LOW”
，
“FAIR”
，
“AVARAGE“, “GOOD” and “EXCELLENT“, then the display screen return to the normal readout stage.
Customer made program
As other programs , the program customer 1 or customer 2 is selected from program selection by pressing
ENTER key.
If the program is not established, it can be displayed just on the bottom line of dot matrix LED.
In this stage, press
“
+
”
/
“
-
”
key to select resistance level of every section, press ENTER key to save
this section and shift to next one.
After finishing edition of 24 section, the program is saved, then it indicating „Entering into weight“ mode.
When program is displayed on the program set mode, press reset key, then the program will change soon.
During the time the Customer made program
is operated, if the resistance level change, the testing
program section will be averaged, but this would not impact on the deposition.
Heart rate control
After the heart rate control program is selected,
“ ”
symbol displayed on dot matrix,
‘
heart
rate’displayed on the center of number.
Press enter key to confirm heart rate control program, it indicates that we enter into age set,then the dot
matrix LED display selected value,
“
age
”
display above the number.
Press enter key to confirm age value, it indicates that the dot matrix LED display traget heart rate ,this form
must be
（
220-Age*70
）
,and ,
“
traget heart rate
”
display above the number.
Change the target heart rate by pressing
“
+
”
or
“
-
”
key. Press Enter key again to confirm the value we
selected, then it indicate that we enter into weight set.
When user enter into weight set, the last value display on dot matrix,
“
weight
”
display above the number.
Press
“
+
”
or
“
-
”
key to adjust the value, then press ENTER key to confirm.