7
GB
A
B
Rotary switch in “Drill” position.
Change switch
position only when the drill is at a standstill!
Rotary switch in “Hammer drill” position.
Change switch position only when the drill
is at a standstill!
Please note:
This switch should be in ‘drill’
position when drilling holes in tiles.
On/Off switch:
To switch on:
Press switch A
Continuous operation:
Lock switch A with
locking button B
To switch off:
Press switch A briefly
The speed is varied by applying more or less
pressure on switch A. You can preselect the
speed by turning the knurled screw in switch A.
Anleitung PSM 1010 SPK 1 07.03.2005 8:07 Uhr Seite 7
