3
Receiver
1. Power input
Connect with PSU.
2. HDMI input
Connect with HDMI source device.
3 Micro USB
Connect to the source device USB port (optional).
4. Transmission LED
Slow flash LED indicates the unit has started radio
transmission and has not yet found the receiver, transmitter
is in scan mode, searching for a matching receiver.
Fast flash LED indicates the transmitter and receiver have
been connected well with each other;
LED solid on means the transmitter and receiver have
established an audio or video connection, transmission in
operation.
5. Power LED
Illuminates when the power is switched on.
6. Reset button
Long press (>10 seconds): set to factory default
When the button is short pressed on the receiver if other
transmitter sources are available in its network, the receiver
will give up the change connection to the next available
source
Transmitter
1. Power input
Connect with PSU.
2. HDMI input
Connect with HDMI source device.
3 Micro USB
Connect to the source device USB port (optional).
4. Transmission LED
Slow flash LED indicates the unit has started radio
transmission and has not yet found the receiver, transmitter
is in scan mode, searching for a matching receiver.
Fast flash LED indicates the transmitter and receiver have
been connected well with each other;
LED solid on means the transmitter and receiver have
established an audio or video connection, transmission in
operation.
5. Power LED
Illuminates when the power is switched on.
6. Reset button
Restores the device to factory setting.
