3
Receiving mode
•
The Transceiver defaults to receive mode if no input or output leads are connected.
•
Connect one of the supplied connection cables (as required) into the ‘Receive’ jack
and the other end to the destination equipment input sockets.
•
Power on the transceiver by pressing and holding the main button for approx 3
seconds.
•
The red ‘receive’ LED will be lit.
•
The blue LED will flash rapidly to indicate it is in pairing mode.
•
On the source equipment search for RT-B6 and pair the devices.
•
Once connected the blue LED will flash slowly.
Note:
Depending on the source device, you may set options for what functions are
connected to the transceiver.
Dual Device Transmit/Receive mode
•
Connect one of the supplied connection cables (as required) into the ‘Transmit’ jack
on one transceiver device and the other end to the source equipment output sockets.
•
Connect one of the supplied connection cables (as required) into the ‘Receive’ jack
on the second transceiver device and the other end to the source equipment output
sockets.
•
Power on both transceivers by pressing and holding the main button for approx 3
seconds.
•
The red ‘transmit’ LED illuminates on the first transceiver and the red ‘receive’ LED
illuminates on the second.
•
The blue LED will flash rapidly on both transceivers to indicate they are in pairing
mode.
•
Once the connection is established the blue LEDs on both will flash slowly.
)
)
)
)
)
)
Audio
Source
Wireless
Audio
Source
Transceivers
Transceiver
Receiving
Device
Receiving
Device
