CONNECTIONS
•
A compact solution to connect up to 4 pairs of loudspeakers to one audio source.
NOTE:
standard 8ohm loudspeakers should be used to maintain safe impedance levels
for the amplifier.
•
Connect the source equipment loudspeaker output to the Switch spring clip speaker
input terminals noting the polarity.
•
Connect up to 4 pairs of speakers to the spring clip output terminals noting the
polarity. Use terminals A for the most frequently used and least used to terminals D.
OVERVIEW
SPECIFICATIONS
OPERATION
Rating
100W (rms) per channel
Dimensions (W x H x D)
177 x 48 x 107mm
CLEANING & MAINTENANCE
•
Clean the outside casing with a soft cloth lightly moistened with a mild detergent
•
Never use any abrasive or solvents.
SOURCE EQUIPMENT
(AMPLIFIER)
INPUT
+
_
+
_
+
_
L R L R
L R L R
L R
•
When the source equipment is outputting a signal, pressing the appropriate button
on the front panel directs the output to the chosen loudspeakers.
•
A red indicator appears in the transparent window in the button to indicate which
loud speakers are active.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC
EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment (WEEE).
Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment,
recovery and recycling of the materials used. Contact your local authority for details of recycling schemes in your area.
Made in Taiwan PR2 9PP
Man Rev 1.0
