OPERATION
•
Converts optical or coaxial digital audio signals to analogue left and right stereo
signals.
•
Supports LPCM digital audio.
•
Connect the source device to either the Optical TOSLink or Phono digital coaxial
input sockets.
•
If a digital output is also required, a suitable device can be connected to the digital
loop out phono coaxial connector.
•
Connect destination analogue devices to the R and L channel phono output
sockets.
•
Connect the PSU 12V output to the power in socket and plug the PSU into the
mains supply and turn on the power.
•
The error LED will flash if the input level is too high and overload occurs.
OVERVIEW
CLEANING & MAINTENANCE
•
Clean the outside casing with a soft cloth lightly moistened with a mild detergent
•
Never use any abrasive or solvents.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC
EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment (WEEE).
Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment,
recovery and recycling of the materials used. Contact your local authority for details of recycling schemes in your area.
Made in Taiwan
PR2 9PP
Man Rev 1.0
SPECIFICATIONS
Output Connections
R and L channel RCA phono sockets
Input Connections
Optical TOSLink & phono digital coaxial sockets
DC input voltage
12VDC via PSU
Dimensions (WxHxD)
65 x 29 x 74mm
Weight
70g
