15
E
N
G
L
IS
H
FUNCTIONAL DESCRIPTION
A
3/8” (10 mm) chuck
B
Chuck stop ring
C
Torque regulation ring
D
Torque indicator scale
E
Bright LED work light
F
Forward / reverse / neutral
lock switch
G
Variable speed trigger
H
Rubber-covered padded
handle
I
14.4 volt 1.2 Ah Ni-Cd
rechargeable battery
J
Battery lock button
K
Magnetic plate
OPERATION
VARIABLE SPEED
Y
ou can vary the spindle rotation speed by modulating finger pressure on the
trigger (G in the functional description). Light finger pressure cause the drill speed
to be slow; heavier pressure will cause high drill speed.
ROTATION DIRECTION
Your drill is equipped with a 3-position forward / reverse / neutral-lock switch (F in
the functional description) through the housing above the trigger.
1.
1.
When knob is pushed toward the left, rotation is forward (clockwise).
2. When pushed in from the left to the right side, rotation is reversed
(counter-clockwise).
3. When in center position, it is locked in neutral and the trigger is blocked. Do not
push the rotation direction knob until the chuck stops turning.
TORQUE REGULATOR
This is a 22-position ring (C in the functional description) situated between the
chuck and the drill body.
When arrow on the top of the housing points to 1 on the Torque indicator scale
(D in the functional description), torque is at minimum before the clutch disengages
the chuck from the drive.
A
B
C D
E
F
G
H
I
J
K
