21
E
N
G
L
IS
H
If the lawnmower will not collect the cuttings efficiently, the grass discharge chute
may be blocked, the grass box may be full, or the underside of the mower deck
may be clogged.
Do not attempt to remove grass from the grass chute area while the blade is
rotating. Before clearing any blockages, or emptying the grass box, make sure that
the motor is switched off and disconnected from the power supply. The blade will
continue to rotate for a few seconds after the engine has stopped.
CUTTING HEIGHT
The mower has 8 adjustable height settings:
1”, 1.25”, 1.5”, 1.8”, 2.1”, 2.35”, 2.6”, & 2.95”
(25, 32, 39, 46, 53, 60, 67, and 75 mm)
1. Grasp the height adjustment handle and squeeze the 2 pieces together to
release the adjustment lock.
2. Move the handle towards the front of the lawnmower to lower the blade, and
towards the rear of the lawnmower to raise the blade.
3. When desired height is set, release the handle to lock the height adjuster in
place.
CHANGING THE BLADE
WARNING!
Disconnect the tool from power before doing this or any other
maintenance.
Removal
1. Lay the lawnmower on its side.
2. Wearing thick gloves, grip the blade with one hand.
3. With the spanner provided, undo the blade bolt by turning it counter-clockwise.
4. Remove the blade.
Re-Assembly
1. Wearing thick gloves, grip the new blade with one hand.
2. Place the blade over the blade housing making sure that the two holes on the
blade are securely located over the 2 lugs on the blade housing.
3. Using the spanner provided, replace blade bolt and tighten by turning
clockwise.
NOTE
: The blade included with this tool is considered as a consumable and
therefore is not covered under warranty. To obtain a replacement blade, contact
your retailer or call us at 1(866) 599-5916 ext.5.
OPERATION
!
