PRO POWER JX-206A, Assembling User Manual, Page: 20 / 29

Tools Required Assembling the Machine: Two Adjustable Wrenches, and one Philips
Screw driver.
NOTE: It is strongly recommended this machine to be assembled by two or more people to
avoid possible injury.
Carefully unpack each component, checking against the part list that you have all the
necessary parts to complete the assembly of your product
PLEASE NOTE that some of the parts may be pre-fitted to major components. So please
check carefully before contacting Argos in any event.
STEP 1 (See Diagram 1)
A. Connect both Barbell Upright Support(#2) by Cross Beam(#3) in mid span, Align the hole
and secure each end of the Cross Beam(#3) with two M8
×
50mm Carriage Bolt(#17), two
Φ
8mm Washer(#23) and two M8 Aircraft Nut(#26).
B. Place both Barbell Upright Support(#2) on the outside of the Rear Stabilizer(#1), Align the
hole and secure with two M8
×
82mm Carriage Bolt(#12), two
Φ
8mm Washer(#23) and two
M8 Aircraft Nut(#26).
C. Attach both Stabilizer Brackets(#13) to the outside of the Rear Stabilizer(#1) and to the inside
of both Barbell Upright Support(#2), Secure both Stabilizer Brackets(#13) with two Barbell
Upright Support(#2) with two M8
×
50mm Carriage Bolt(#17), two
Φ
8mm Washer(#23) and
two M8 Aircraft Nut(#26), Secure both Stabilizer Brackets(#13) to Rear Stabilizer(#1) with two
M8*45MM Carriage Bolts (#14), two
Φ
8mm Washer(#23) and two M8 Aircraft Nut(#26),
( Note: Do not tighten the bolt at this step. )
Diagram 1
Assembly Accessories 1
Part No Description QTY
12 M8
×
82mm Carriage Bolt 2
14 M8
×
45mm Carriage Bolt 2
17 M8
×
50mm Carriage Bolt 6
23
Φ
8mm Washer 10
26 M8 Aircraft Nut 10
30 Lock Pin 2