![background image](http://html1.mh-extra.com/html/pro-point/8886442/8886442_instructions-manual_1607419011.webp)
V1.0
19.2V Cordless Grease Gun
8886442
Visit www.princessauto.com for more information
11
3. If air bubbles continue to appear in the grease, follow the steps in
the section above called Priming the Grease Gun until the grease
flows free of air pockets.
GREASING A GREASE FITTING
1. The tool’s grease coupler (A) has a jaw-type construction. The
coupler jaws will snap on to a grease fitting and maintain a tight fit.
2. To connect the coupler to the grease fitting, press the coupler
straight onto the grease fitting to form a snug fit (Fig. 2-1).
3. Start operating the grease gun with
the coupler as square to the grease
fitting as possible.
4. Once greasing is completed, slightly
tilt the coupler, twist and pull back
(Fig. 2-2). The tilt and twist action will
allow easy removal of the coupler
from the grease fitting.
CARE & MAINTENANCE
CAUTION! Ensure the switch is OFF, the battery is removed from
the grease gun and the charger is unplugged before performing
any maintenance. Failure to do so can cause personal injury
.
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical replacement
parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool clean, dry and free from oil/grease at all times.
5.1 Do not use solvents to clean the grease gun.
6. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
Fig. 2