pro.point 8619470 Page 47 Operating Manual Download

Page: 47 / 50

WARRANTY EXCLUSIONS

This Warranty covers Material and Faulty Workmanship defects only.

This Warranty does not cover damage caused by:

•

Normal wear and tear due to usage

•

Misuse or abusive use of the PRINCESS AUTO instructions supplied with the product.

•

Failure to clean or improper cleaning of the product

•

Failure to maintain the equipment such as regular services etc

•

Incorrect voltage or non-authorised electrical connections

•

Improper installation

•

Use of non-authorised/non-standard parts

•

Abnormal product performance caused by any ancillary equipment interference or other external factors

•

Failure or any breakage caused by overload, dropping or abusive treatment or use by the customer

•

Repair, modifications or other work carried out on the product other than by an Authorised PRINCESS AUTO

Dealers

WARRANTY

As part of Royal Service, a customer may return a defective unit to any Princess Auto location for a new replacement

unit within 3 years of the purchase date.

Warranty/Warranty Exclusions

Summary of Contents for 8619470



















































Search results

Summary of Contents for 8619470

Reviews:

Related manuals for 8619470

Brands by name

Popular brands

pro.point 8619470, Operating Manual

Search results

Summary of Contents for 8619470

Reviews:

Related manuals for 8619470

Brands by name

Popular brands