- 2 -
- 3 -
Introduction
Thank you for purchasing this Sigma EQ Hyper Charger by Pro-Peak.
This charger provides you with a rapid charger/ discharger plus an integrated balancing
circuit. It is computerised with a high performance microprocessor and specialised
operating software. It can maintain your battery at its best condition and control it safely.
Please read this operating manual completely as it contains a wide variety of specific
programming and safety information.
You need to keep this manual in a safe place, and be sure to pass it on to the new
owner if you ever dispose of the Sigma EQ Hyper.
Special Features
Operating Software
Every operating program in the unit is controlled with mutual links and communications
to prevent any possible error. It introduces maximum safety, including input voltage
warning, reverse polarity protection and a Lithium cell-count input error warning.
High-Power and High-Performance Circuit
The Sigma EQ Hyper ensures the circuit has maximum output power of 200Watts. As
a result it can charge or discharge up to 18 cells of NICd /NiMH and 6 series of Lithium
batteries with maximum current of 10A. Furthermore, the cooling system works with
extreme high efficiency and can run this high power without effecting the circuit or
operating system.
Individual Cell Voltage Balancer for Lithium Batteries
The Sigma EQ Hyper has an individual cell voltage balancer inside. It does not need a
separate balancer when charging Lithium batteries (Li-ion/ Li-Po/ Li-Fe).
Balance Individual Cells on Discharge
The Sigma EQ Hyper can also monitor and balance individual cells in a Lithium battery
pack during the discharge process. If the voltage of any one cell varies abnormally, the
process will be stopped with an error message.
Various Types of Lithium Battery
The Sigma EQ Hyper can accept three types of Lithium battery-Li-ion, Li-Po and
Li-Fe. Each has different characteristics due to their chemistry. Any one of these can
be selected before the job is processed. For their specifications, please refer to the
‘Warnings and Safety notes’ section.