8
Button/port Description
DC IN
Connect with DC Power Adapter.
Reset
Reset configurations to default. Press the button and hold for 10
seconds.
WPS
Click WPS button about 2-3 seconds while you are connecting a PC of
wireless adapter with WPS function (you must enable WPS’ PBC
function).
LAN
(1x, 2x, 3x, 4x)
Connect LAN systems with RJ-45 cable.
WAN
Connect DSL or Cable modem.
System Requirements
‧
One or more PCs (desktop or notebook) with Ethernet interface.
‧
TCP/IP protocol must be installed on all PCs.
‧
Have valid Internet Access account and a DSL or cable modem.
‧
10/100BaseT network cables with RJ-45 connectors.
‧
In case to use Wireless Access Point, all Wireless devices must be compliant with
IEEE 802.11b/g.
‧
System with MS Internet Explorer ver. 5.0 or later, or Netscape Navigator ver. 4.7 or
later.
Installation Instruction
1) Power off Wireless Router and DSL/cable modem.
2) Connect systems to the LAN ports on the Wireless Router with straight LAN cables.
3) Connect the DSL or cable modem to the WAN port on the Wireless Router.
4) Power on DSL or cable modem first, then connect power adapter to the power jack
on the Wireless Router and plug the power cable into an outlet.
5) Check LEDs.
a) Once power on Wireless Router, Power LED should be on.
b) LAN LED should be on for each active LAN connection.
c) The WAN LED should be on when the DSL or cable modem is connected.
Warning
: Only use the power adapter is provided from this package, use other power adapter
may cause hardware damage.
