13
The temperature sensor is located besides the USB and COM cables.
In a MASTER/SLAVE Configuration, the temperature sensor on the MASTER unit will be the only
temperature sensor that is required to be installed. The temperature sensor on the SLAVE unit
can be tucked away.
1) Install the temperature sensor cage so that it sits below the unit(s).
In a retrofit, the case must reside outside the cabinet below the units. This will require for a hole
to be drilled on the bottom of the cabinet so that the temperature sensor cable can be passed
through. Complete the pass-through by sealing the hole with silicone.
2) Remove the screw from the temperature sensor.
3) Feed the temperature sensor into the temperature case.
4) The temperature sensor will be suspended in the center of the cage by securing it in place
with the screw.
MASTER ML+ (Backside)
Temperature Sensor.
Summary of Contents for Marquee-Lite Plus 4025
Page 1: ...1 Model 4025...
