TEMPERATURE SENSOR INSTALLATION
Some of the ML+ come equipped with a temperature sensor option that will allow the ML+
to read and display the temperature.
The sensor will be attached next to the power supply on the backside of the ML+.
NOTE
: In a MASTER/SLAVE Configuration, the temperature sensor on the MASTER
ML+ will be the only temperature sensor that is required to be installed. The
temperature sensor on the SLAVE ML+ can be tied and tucked away.
INSTALLATION
1) Drill a hole under the cabinet and feed the temperature line through.
2) Feed the temperature line into the temperature sensor case so that it is floating in
the center and lock the line in place.
MASTER ML+ (Backside)
Temp Sensor Case (top view)
Temp Sensor
Locking Nut
Page 5
