Operation
Simply press the button on the Wireless Transmitter to advance the number.
A beep will sound every time the button is pressed.
Troubleshooting
The LED Queuing Unit does not turn on.
Make sure the light on the power adaptor is on. If it is not on, please try
another outlet.
Unplug the power connection from the LED unit and reconnect firmly.
Make sure the LED unit on/off switch is set to the up position.
How do I reset to zero?
Turn the LED unit off, and back on.
The Wireless Transmitter will not advance the number.
Stand 5 feet from the LED unit and try again.
Replace battery on the Transmitter.
o
Use only ALKALINE TYPE 27A (12 Volts).
Make sure the Dip Switches on LED unit and Transmitter match (see below).
What are the Switches on the back of the LED unit and bottom of transmitter for?
The Dip Switches set the operating frequency of the unit. Please do not
change unless absolutely necessary. Sometimes there are other wireless
devices nearby effecting the communication of the Queuing system. If this is
occurring, simply change the Dip Switches on the LED unit to a different
setting arrangement and make sure the Transmitter is set identically.
LED Unit Dip Switches
Transmitter Dip Switches
