© Pro-Ject Audio Systems · Pro-Ject VT-E BT L · Revision 2016.07.27
8
3.
CARTRIDGE, VERTICAL TRACKING FORCE (VTF)
The turntable is supplied with fitted cartridge Ortofon OM 5E. The counterweight (7) supplied is suitable only
for Ortofon OM cartridges. Cartridge downforce is pre-adjusted from the factory.
Please note: It is not recommended to change the cartridge or vertical tracking force without prior
consultation with your dealer.
4.
CONNECTION TO THE AMPLIFIER
The record player has two possible outputs – Line OUT (14) with integrated preamplifier and Phono OUT (15)
for connection to the preamplifier. If you choose Phono OUT (15), than use the Phono input (sometimes
labelled gram, disc or RIAA) on your amplifier. Make sure that the phono input offers correct matching and
amplification for the type of cartridge used. If you choose Line OUT (14), than use the Line inputs (like CD,
Tuner, Tape or Video).
Take care about connecting the left and right channel correctly. The
RIGHT CHANNEL
is usually marked
RED
, the LEFT CHANNEL BLACK or WHITE. Check the manual of your amplifier for relevant information. An
earthing wire may be connected to the screw terminal between the sockets if you encounter humming
problems.
For detailed product information regarding Pro-Ject Audio Systems interconnect cables, phono amplifiers
and stereo power amplifiers, please visit our website:
5.
BLUETOOTH PAIRING
The record player has Bluetooth output and transmit signal automatically when is connected to mains.
It is paired automatically with any device with Bluetooth receiver (such as Pro-Ject MaiA, MaiA DS, Bluetooth Box
s and Bluetooth Box E).
For pairing with other devices and portable speakers use the manual of the given product.
For restart of the Bluetooth transmitter, please disconnect the record player from mains. Restart is needed only
when there is a change of the Bluetooth receiver.
For detailed product information regarding Pro-Ject Audio Systems Bluetooth audio receivers, please visit our
website:
6.
MAINS POWER CONNECTION
The turntable is supplied with a power supply suitable for your country's mains supply. Check the label before
connecting to ensure compliance with the mains rating in your house.
Connect the low voltage plug from the power supply to the socket
(19)
on the rear of the record
player before
connecting the power supply to the mains
.
7.
SWITCHING ON AND OFF
Pressing the power switch (1) alternately starts or stops the motor.