Pro-Ject Audio Systems VT-E BT L Instructions For Use Manual Download Page 13

© Pro-Ject Audio Systems · Pro-Ject VT-E BT L · Revision 2016.07.27 

 

13 

Never return a record player without making sure that is it safely disassembled and correctly packaged in the 
original packaging according to the diagrams on the last page of this user guide.  
Fit the cartridge protection cap and the transport lock for the tonearm tube, prior to carefully packaging the 
record player. 

Warranty 

 

 

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions 

for use and/or by transportation without the original packaging. Modification or change to any part 
of the product by unauthorized persons, release the manufacturer from any liability over and above 
the lawful rights of the customer. 

 
 

Pro-Ject Audio Systems is a Registered Trademark of                
H. Lichtenegger. 
This guide was produced by: Pro-Ject Audio Systems 
Copyright 

©

 2016. All rights reserved.

 

 

The information was correct at the time of going to press. 
The manufacturer reserves the right to make changes to 
the technical specification without prior notice as deemed 

necessary to uphold the ongoing process of technical 
development. 

 

 

Summary of Contents for VT-E BT L














Reviews: