© Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28
9
4.
ANTI-SKATING FORCE ADJUSTMENT
Put the anti-skating thread hook over the anti-skating adjustment scale.
The anti-skating force must be adjusted corresponding to the downforce as follows:
Downforce
Groove in the stub (15)
10 - 14mN
1
st
from bearing rings
15 - 19mN
2
nd
" " "
20mN and bigger
3
rd
" " "
5.
CONNECTION TO THE AMPLIFIER
The record player has gold plated female RCA phono sockets (19) so you can substitute the interconnect cables
supplied with higher quality cables such as the Pro-Ject Connect it C/CC/Si interconnect cables for
connection to the amplifier if you wish. Use the Phono input (sometimes labelled gram, disc or RIAA) on your
amplifier. Make sure that the phono input offers correct matching and amplification for the type of cartridge
used. Line inputs (like CD, Tuner, Tape or Video) are not suitable.
Take care about connecting the left and right channel correctly. The
RIGHT CHANNEL
is usually marked
RED
, the LEFT CHANNEL BLACK or WHITE. Check the manual of your amplifier for relevant information. An
earthing wire may be connected to the screw terminal between the sockets if you encounter humming
problems.
If your amplifier does not have an input suitable for phono cartridges, a separate phono amplifier stage for
MM or MC cartridges is required. It has to be connected between record player and a free line level input of
the amplifier.
For detailed product information regarding Pro-Ject Audio Systems interconnect cables and phono amplifiers
please visit our website:
www.project-audio.com
