Pro-Ject Audio Systems THE CLASSIC Instructions For Use Manual Download Page 6

© Pro-Ject Audio Systems · Pro-Ject The Classic · Revision 2016.06.28 

 

Dear music lover, 

 

thank you for purchasing a Pro-Ject Audio Systems record player. 

In order to achieve maximum performance and reliability, please study these instructions carefully. 

 

 

Warning of a hazard for the user, the unit or possible misuse  

 

Important notice 

 
The  following

 

instructions  for adjusting the cartridge are provided in case the cartridge is replaced by a 

different model at a later date. 
During assembling and adjustment small parts could be lost if they are not carefully placed in a suitable 
receptacle.  Before starting assembly make yourself acquainted with the parts listed above which are 
correspondingly numbered  in the technical drawings above. Separately packed items are marked with an 
asterisk *. 

Safety instructions 

 

The power supply is used to connect and disconnect the unit from the mains. Make sure that the plug 
is easily accessible at all times.

 

Hold the plug when unplugging the power cord. Never handle the 

power cord while your hands are wet or damp. 
Avoid letting liquids enter the device. Never place any item containing liquid, like a flower vase, on 
or near the device. Never spill any liquid on the device. Never place any naked flame sources, like 
lighted candles, on or near the device. The product shall not be used in damp or wet locations, next to 
a bathtub, sink, swimming pool or any other similar conditions. 
Keep plastic bags away from children to prevent any risk of suffocation. 

 

 

  

The turntable was shipped partially disassembled in order to avoid damage to sensitive parts.       
Please check immediately to make sure that neither the packaging nor the device was damaged in 
transit.

 

 

 

 

 

 

 

 

 

 
 

 

 

 

 

 

Summary of Contents for THE CLASSIC















Reviews: