© Audio Trade GmbH · Pro-Ject Juke Box / Ortofon OM 5E · Revision 19.8.09/1.9.09
6
Maintenance and cleaning
Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic
cloth. Never use a dry cloth because this will create static electricity which attract more dust! Antistatic
cleaning fluids are available at specialist stores but must be applied sparingly to avoid damage to rubber
parts. It is recommended to fit the needle cover before cleaning or maintenance is carried out to avoid damage.
If the player is not used over a long period of time the drive belt can be removed to prevent unequal stretching.
!
Always disconnect the record player from the mains power supply as a precaution before maintenance!
Useful tips
The record player should be positioned on a low-resonance surface such as wood or multiple layer ply board
to avoid structural vibrations disturbing replay.
Technical specifications PRO-JECT JUKE BOX
Record player
Nominal speeds
33,33/45,11 r.p.m.. *** 78 r.p.m. optional
Speed variance
±0,9 %
Wow and flutter
±0,15 %
Signal to noise
-55dB
Downforce range
10-35mN
Effective tonearm length
8,6 " ( 218,5mm)
Overhang 18,5mm
Outboard power supply
16V/500mA AC, suitable for your country's mains supply
Cartridge Ortofon OM 5E
Frequency range
20-25.000Hz
Channel separation
22dB/1kHz
Output voltage
4mV
Recommended load resistance
47kohms/amplifier connection – MM-input
Compliance/stylus type
20µm/mN – elliptical
Recommended tracking force
17,5mN
Weight 5g
Replacement stylus
Ortofon Stylus OM 5E
Amplifier
Power output
2 x 20W/30W at 8ohms/4ohms (both channels driven)
Frequency response
20Hz - 20kHz (+ - 0,2 dB)
Channel separation
> 40dB at 20kHz
Noise floor
> -100dB (A weighted)
THD
< 0,05% at 10W
Gain 22dB
Phono amplifier
Moving magnet (MM)
RIAA-equalisation curve accuracy
20Hz - 20kHz / max. 0,5dB
Line level inputs
3 pairs RCA/Phono sockets
Input impedance
20kohms
Outboard power supply
20V/3A DC (peak 7A DC), suitable for your country's mains supply
Replacement battery remote control
1 x CR 2032 / 3V
Power consumption
65W
Dimensions (W x H x D)
415 x 118 x 350mm, dust cover open 415 x 365 x 405mm
Weight 6,5kg
