background image

© Audio Trade GmbH · Pro-Ject Juke Box / Ortofon OM 5E · Revision  19.8.09/1.9.09

 

3

PRO-JECT JUKE BOX 

Controls, features and connections

 

1  

Motor 

2  

Stepped drive pulley 

3  

Drive belt * 

 

 

3a     Hook * 

4  

Hub 

5  

Platter with felt mat * 

6  

Tonearm counterweight *  

6a     Downforce scale 

7  

Tonearm lift lever 

8/18   Tonearm rest and removable transport lock 
9  

Tonearm tube   

 

9a     Tonearm base 

10  

Lid * 

11  

Lid hinges 

12  

Hinge fasteners 

13  

Power supply socket 16V  

13a    Power supply socket 21V   

14  

Speaker connector 

 

14a    Line level inputs 

15 

Anti-skating weight adjustment scale 

16  

Anti-skating weight * 

17  

Anti-skating weight support hoop 

20  

Power switch 

 

 

20a    Start/stop switch (motor) 

21  

Headshell with finger lift and fitted Ortofon OM 5E cartridge 

22  

Single adapter * 

23 

3,5mm connector * 

 

16V and 21V power supply (not shown) * 

 

Dear music lover, 
thank you for purchasing a PRO-JECT AUDIO record player. 

In order to achieve maximum performance and reliability with this record player you should study these instructions 

for use carefully. 

!

 

Warning of a hazard for the user, the unit or possible misuse.  

 

Important notice. 

During assembly and adjustment of the deck small parts could be lost if not carefully placed in a suitable

 

receptacle. Before starting assembly make yourself acquainted with the parts listed above and correspondingly 

numbered in the technical drawings above. Separately packed items are marked with an asterisk *. 

Set-up 

Make sure the surface you wish to use the turntable on is level (use a spirit level) before placing the turntable on it.  
Remove the transport lock (18) from the tonearm. Store it in the original packaging so it is are available for 
any future transportation. 
Fit the drive belt (3) around the hub (4) and the smaller diameter part of the motor pulley (2). Avoid getting 
sweat or grease on the belt as these will deteriorate the performance and reduce the belt's lifespan. Use 
absorbent kitchen paper to remove any oil or grease from the outer edge of the hub and the belt. Fit the 
platter (5) and felt mat over the spindle of the hub (4). 

Summary of Contents for Juke Box









Reviews: