Pro-Ject Audio Systems DS2 Instructions For Use Manual Download Page 8

© Pro-Ject Audio Systems · Pro-Ject MaiA DS2 · Revision 22.04.2021 

 

 

 

8

Phono input gain: 

MM 40 / MC 60 dB 

S/PDIF coaxial input: 

PCM up to 24bit and 192kHz 

S/PDIF optical input: 

PCM up to 24bit and   96kHz 

USB input: 

USB Audio Class 2 (requires USB 2.0 or higher on computer) 

USB data transfer: 

Asynchronous XMOS technology, driver on attached CD-ROM 

Digital to Analogue converter: 

Texas Instruments PCM 1796 24bit/192kHz Delta-Sigma 

Variable line level output: 

1 pair RCA  

BT music receiver codec: 

aptX, A2DP profile 

BT maximum TX power: 

+8dBm 

Trigger input: 

12V on/off detector 

Tigger output: 

12V 

Outboard power supply: 

36V/5,5A DC, suitable for your country's mains supply 

Replacement battery remote control: 

1 x CR2032 / 3V or 1 x CR2025 / 3V 

Dimension (W x D x H):   

          206 x 240 x 71 aluminium; 

 

 

 

 

          240 x 240 x 72 wood 

Weight (without power supply): 

         1 730 g aluminium,  
         2 130 g wood 

 Service 

Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for 
further  advice.  Only  if  the  problem  cannot  be  resolved  there,  the  unit  should  be  sent  to  the  responsible 
distributor in your country. 

Warranty 

 

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions 
for  use.  Modification  or  changes  to  any  part  of  the  product  by  unauthorized  persons  release  the 
manufacturer from any liability over and above the lawful rights of the customer. 

Copyright, trademarks 

Pro-Ject Audio Systems is a registered Trademark of     
H. Lichtenegger. 

This guide was produced by: Pro-Ject Audio Systems 
Copyright 

©

 2019. All rights reserved.

 

 

The information was correct at the time of going to 
press.  The  manufacturer  reserves  the  right  to  make 
changes  to  the  technical  specification  without  prior 
notice as deemed necessary to uphold the ongoing 
process of technical development.

 

Windows

®

,  Windows  XP

®

,  Windows  Vista

®

,  Windows  7

®

,  Windows  8

®

,  Windows  10

®

  are  trademarks  of  the 

Microsoft group of companies. Mac

®

 and Mac OS

®

 are trademarks of Apple Inc., registered in the U.S. and 

other countries. TOSlink

®

 is a registered trademark of Toshiba corporation. Dolby

®

 is a registered trademarks 

of Dolby Laboratories. DTS

 is a registered trademark of DTS, Inc. DSD and the DSD logo are trademarks of 

Sony Corporation. 

 

BT® is a trademark owned by the BT SIG, Inc., , Microsoft®, Windows®, are either registered trademarks or 
trademarks of Microsoft Corporation, Apple is registered trademark of Apple Inc., Android

 is a trademark of 

Google Inc. 

 
Waste from Electrical and Electronic Equipment (WEEE): This directive mandates the collection and recycling 
of electronics and component materials in order to reduce the amount going to landfills. Outside North 
America, when the user decides to discard this product, it must be sent to a separate collection facility for 
recycling. Please contact your point of purchase for more details.

 

 

 

 

Summary of Contents for DS2










Reviews: