background image

© Audio Trade GmbH · Pro-Ject Debut Carbon Esprit SB / Ortofon 2M Red · Revision 2013.11.15

 

 

3

Pro-Ject Debut Carbon Esprit SB 

Controls, features and connections

 

1  

Motor brackets with Sorbothane

®

 pads 

2  

Stepped drive pulley 

3  

Drive belt (flat and round)* 

4  

Hub 

5  

Platter * 

6  

Tonearm counterweight *  

6a     Downforce scale 

7  

Tonearm lift lever 

8/18   Tonearm rest and removable transport lock 
9  

Tonearm tube   

 

9a     Tonearm base 

10  

Lid * 

11  

Lid hinges 

12  

Hinge fasteners 

13  

Power supply socket 

14  

Phono output sockets and earth connection 

15 

Anti-skating stub with anti-skating weight adjustment scale 

16  

Anti-skating weight * 

17  

Anti-skating weight support hoop 

19  

ON/OFF switch, speed selector 

20  

Headshell with finger lift and fitted Ortofon 2M Red cartridge 

21 Motor 
22 

Single adapter * 

 

Connection cable (not shown) * 

 

Power supply (not shown) * 

 

Dear music lover, 
thank you for purchasing a Pro-Ject Audio record player. 

In order to achieve maximum performance and reliability with this record player you should study these instructions 
for use carefully. 

!

 

Warning of a hazard for the user, the unit or possible misuse. 

 

Important notice. 

** Your turntable has been delivered with a factory fitted and adjusted cartridge, please ignore the 
cartridge set up instructions unless changing the cartridge at a later date. 

During assembly and adjustment of the deck small parts could be lost if not carefully placed in a suitable 

receptacle. Before starting assembly make yourself acquainted with the parts listed above and correspondingly 
numbered in the technical drawings above. Separately packed items are marked with an asterisk *. 

Safety instructions 

!

 

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the 
voltage in your area meets the voltage requirements printed on the power supply. 
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily 

accessible at all times.

 

Never handle the device, the power supply while your hands are wet or damp. 

Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, 
such as a flower vase on or near the device. Never spill any liquid on the device or the power supply. 

Never place any naked flame sources, such as lighted candles on or near the device. The product shall not 
be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions. 
Keep plastic bags away from children to prevent any risk of suffocation. 

Summary of Contents for Debut Carbon Esprit SB









Reviews: