Pro-Form TRAINER 8.0 User Manual Download Page 26

26

 HOW TO FOLD AND MOVE THE TREADMILL 

 HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline 

to zero before you fold the treadmill. Then, remove 

the key and unplug the power cord. CAUTION: You 

must be able to safely lift 45 lbs. (20 kg) to raise, 

lower, or move the treadmill.

1.    Hold the metal frame (A) firmly in the location 

shown by the arrow below. CAUTION: Do not hold 

the frame by the plastic foot rails. Bend your 

legs and keep your back straight.

2.   Hold the frame (A) firmly with your right hand. Pull 

the latch knob (B) to the left and hold it. Raise the 

frame until the latch plate (C) is past the latch pin 

(D). Then, slowly release the latch knob; make 

sure that the latch plate is resting against the 

latch pin.

   To protect the floor or carpet, place a mat under 

the treadmill. Keep the treadmill out of direct 

sunlight. Do not leave the treadmill in the storage 

position in temperatures above 85°F (30°C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, fold it as described at 

the left. CAUTION: Make sure that the latch plate is 

resting against the latch pin. Moving the treadmill 

may require two people.

1.    Hold the frame (A) and one of the handrails (E), 

and place one foot against a wheel (F).

2.     Pull back on the handrail (E) until the treadmill will 

roll on the wheels (F), and carefully move it to the 

desired location. CAUTION: Do not move the 

treadmill without tipping it back, do not pull on 

the frame, and do not move the treadmill over 

an uneven surface.

3.    Place one foot against a wheel (F), and carefully 

lower the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

1.  

See drawing 2. Hold the upper end of the treadmill 

with your right hand. Pull the latch knob (B) to the 

left and hold it. Next, lower the frame (A) until it is 

past the latch pin (D). Make sure that the pin does 

not hit against the foot rail. Then, release the latch 

knob.

2.  

See drawing 1 at the left. Hold the metal frame 

(A) firmly with both hands, and lower it to the floor. 

CAUTION: Do not hold the frame by the plastic 

foot rails, and do not drop the frame. Bend your 

legs and keep your back straight. 

A

1

Engaged

B

B

C

D

A

2

E

A

F

1

Summary of Contents for TRAINER 8.0





































Reviews: