11
12. Firmly tighten the four 3/8" x 2 3/4" Bolts (7) and
the four 3/8" x 1 1/4" Bolts (8) (only one side is
shown).
Press the Left Base Cover (82) and the Right
Base Cover (83) onto the Base (94) until they
snap into place.
12
83
8
82
94
11. Set the console assembly on the Left Handrail
(88) and the Right Handrail (87).
Be careful not
to pinch any wires.
Insert the excess Upright
Wire (not shown) into the Left Handrail.
Attach the console assembly with six #8 x 1/2"
Screws (1) and four 1/4" x 1/2" Bolts (36) with
four 5/16" Flat Washers (113) and four 1/4" Star
Washers (35) as shown.
Start all six Screws
and all four Bolts, and then tighten each of
them.
See step 7.
Fully tighten the four 5/16" x 1"
Bolts (5) and the two 5/16" x 1 1/4" Bolts (4).
35
88
1
11
Console
Assembly
1
7
87
36
1
1
36
13. Slide the Left Handrail Cover (85) onto the Left
Handrail (88). Slide the Right Handrail Cover
(86) onto the Right Handrail (87). Attach each
Handrail Cover with a #8 x 1/2" Screw (1).
13
85
86
1
1
87
88
35
113
113
