background image

17

During the workout,

the profile will show

your progress. The

flashing segment

of the profile repre-

sents the current

segment of the

workout. The height of the flashing segment indi-

cates the speed setting for the current segment.

At the end of each segment, a series of tones will

sound. If a new speed setting is programmed for

the next segment, the speed will appear in the dis-

play and the treadmill will automatically adjust to

the new speed setting.

The workout will continue in this way until the last

segment of the profile flashes in the display and

the last segment ends. The walking belt will then

slow to a stop.

If you are using a distance program, the treadmill

will enter a cool down period once you have met

your distance goal. The treadmill will gradually

slow to a stop.

If the speed setting is too high or too low at any

time during the workout, you can manually override

the setting by pressing the speed buttons;

how-

ever, when the next segment of the workout be-

gins, the treadmill will automatically adjust to

the speed setting for the next segment.

To stop the workout at any time, press the Stop

button. To restart the workout, press the Start but-

ton or the Speed increase button. The walking belt

will begin to move at 1 mph. When the next seg-

ment of the workout begins, the treadmill will auto-

matically adjust to the speed settings for the next

segment.

6. Select a display mode and monitor your

progress with the display.

See step 7 on page 16.

7. When you are finished exercising, remove the

key from the console.

See step 8 on page 16.

HOW TO USE THE IFIT TRAINING MODE

The optional iFit Live module allows you to connect

your treadmill to your wireless network and unlocks ex-

citing new features. For example, you can download

personalized workouts and track and analyze workout

information on the iFit Live website.

To purchase an

iFit Live module at any time, go to www.ifit.com or

call the telephone number on the front cover of

this manual.

You must have an iFit Live module to

use the iFit training mode.

If you have selected the manual mode, a workout, or

the iFit training mode, press the Menu button to return

to the main menu.

To select the iFit training mode, use the increase and

decrease buttons next to the Enter button and highlight

IFIT TRAINING. Press the Enter button.

For more information on the iFit training mode, go to

www.iFit.com. Note: To use an iFit Live module, you

must have access to a computer with an internet con-

nection and a USB port. You must also have your own

wireless network including an 802.11b router with

SSID broadcast enabled (hidden networks are not sup-

ported).

HOW TO USE THE STEREO SOUND SYSTEM

To play music or audio books through the consoleʼs

stereo speakers, you must connect your MP3 player,

CD player, or other personal audio player to the con-

sole. Locate the audio wire and plug it into the audio

jack on the top of the console. Then, plug the other

end into a jack on your MP3 player, CD player, or

other personal audio player.

Make sure that the

audio wire is fully plugged in.

Next, press the Play button on your MP3 player, CD

player, or other personal audio player. Then, adjust the

volume on your personal audio player or press the Vol

increase and decrease buttons on the console.

If you are using a personal CD player and the CD

skips, set the CD player on the floor or another flat sur-

face instead of on the console.

Current Segment

Summary of Contents for PFTL05099.1





























Reviews: