7
STEP 4
Tighten the L/R pedal (14L/R) to the L/R pedal support
(15L/R) with Hexagon boltM8×45 (37) flat washer (12)
nylon nut M8 (13).
STEP 5
1.
Pass the pulse wire(43) out of
the hole of handlebar post (46) and
then out of the hole of computer brack-
et. As the photograph show.
2.
Tighten the fixed handlebar(42)
to the handlebar post(46) with inner
hexagon boltM8X16 (45) spring wash-
erd (44).
STEP 6
1.
Fix the joint part of L/R handlebar
(28L/R) and L/R swing tube(24L/R) with pro-
tective guard(26a/b) protective guard(55a/b),
then tighten them with screwST3.5X10(27).
2.
Tighten the protective guard (17L/R)
to the L/R pedal support (15L/R) with screw
ST4.2X18 (34).
3.
Tighten the protective guard (54a/b) to
the L/R pedal tube joint (39L/R) with screw-
M5X10 (16).
