12
As you pedal, change the resistance of the pedals by
pressing the Resistance increase and decrease buttons.
There are sixteen resistance levels. Note: After you’ve
pressed the buttons, it will take a moment for the pedals
to reach the selected resistance level.
5. Follow your progress with the display.
The console displays the elapsed time and the distance
you’ve pedaled. Note: When a smart program is selected,
the display will show the time remaining in the program
instead of the elapsed time.It also displays your pedaling
speed (in RPM), the calories and fat calories you’ve burnt
and also your heart rate when you use the handgrip pulse
sensor.
6. Measure your heart rate if desired.
see HOW TO MEASURE YOUR HEART RATE page 8
7. When you are finished exercising, the console will
automatically turn to sleeping mode
If the pedals do not move for a few seconds the console
will turn to sleeping mode. If the pedals do not move and
the console buttons are not pressed for a few minutes,
the temperature will appear on the display and then the
console will automatically turn off.
HOW TO USE THE PRESET PROGRAMS :
1. Turn on the console.
To turn on the console,press any button on the console
or simply begin pedaling. The entire display will light for a
moment; the console will then be ready for use.
2. Select a program
When you turn on the console, the word MANUAL will
flash on the display.
Press Up or DOWN in order to select the program, select
it according to your goals and to the profile shown on the
display. Press ENTER to validate.
Note : Programs 2, 3, 4, 6 and 7 being Performance
programs and programs 1, 5, 8, 9 and 10 being
Endurance programs.
Consult a coach for more details on the selection and
use of a program.
The profile will flash on the display.
3. Entering your datas
You’ll then be able to choose the goal of your workout :
time, distance and calorie.
Select the data with UP and DOWN then press ENTER.
Do the same for Distance and Calories, Then, press
START/STOP to start.
For a quicker start, press the Quick start button and start
pedaling.
4. Change the resistance of the pedals as
desired.
As you pedal, change the resistance of the pedals by
pressing the Resistance increase and decrease buttons.
There are sixteen resistance levels. Note: After you’ve
pressed the buttons, it will take a moment for the pedals
to reach the selected resistance level.
5. When you are finished exercising, the console will
automatically turn off
If the pedals do not move for a few seconds the console
will turn off.
At the end of a program, you will hear a tone and the
program will flash.
WATT PROGRAM :
1. Turn on the console.
To turn on the console,press any button on the console
or simply begin pedaling. The entire display will light for a
moment; the console will then be ready for use.
2. Select a Watt program
When you turn on the console, the word MANUAL will
flash on the display.
Press Up or DOWN in order to select the program WATT.
The WATT will flash on the display. Press ENTER to
validate.
3. Entering your datas
You’ll then be able to choose the goal of your workout :
time, distance and calorie.
Select the data with UP and DOWN then press ENTER.
Do the same for Distance, Calories and WATT, Then,
press START/STOP to start.
NOTE : Since this program is based on your speed, you
cannot change the resistance of the pedals as desired.
4. When you are finished exercising, the console will
automatically turn off
If the pedals do not move for a few seconds the console
will turn off.
At the end of a program, you will hear a tone and the
program will flash.
HEART RATE CONTROL PROGRAMS :
1. Turn on the console.
To turn on the console,press any button on the console
or simply begin pedaling. The entire display will light for a
moment; the console will then be ready for use.
2. Select a Heart Rate program
When you turn on the console, the word MANUAL will
flash on the display.
Press Up or DOWN in order to select one program Heart
