background image

16

FEATURES OF THE CONSOLE

The advanced console offers an array of features 

designed to make your workouts more effective and 

enjoyable. 

When you use the manual mode of the console, you 

can change the resistance of the pedals with the touch 

of a button. As you exercise, the console will provide 

continuous exercise feedback. You can even measure 

your heart rate using the handgrip heart rate monitor 

or a compatible heart rate monitor. See page 20 for 

information about purchasing an optional chest 

heart rate monitor.

You can also connect your tablet to the console and 

use the iFit

®

 Bluetooth Tablet app to record and track 

your workout information.

The console also offers a selection of preset work-

outs. Each preset workout automatically changes the 

resistance of the pedals and prompts you to maintain 

a target speed as it guides you through an effective 

workout.

You can even connect your personal audio player to 

the console sound system and listen to your favorite 

music or audio books while you exercise.

To use the manual mode, see page 17. To use a 

preset workout, see page 19. To use the sound 

system, see page 20. To connect your tablet to 

the console, see page 20. To connect your heart 

rate monitor to the console, see page 21. To use 

the settings mode, see page 21.

Note: Before using the console, make sure that 

batteries are installed (see assembly step 14 on page 

12). If there is a sheet of plastic on the display, 

remove the plastic.

Glock

EBPE73017

ELPE39717

PFEVEX73017

PFEVEL39717

CONSOLE DIAGRAM

Summary of Contents for ENDURANCE 320 E





























Reviews: