10
7. Identify the Left Base Cover (88) and the Right
Base Cover (91). Slide the Left Base Cover onto
the Left Upright (84). Slide the Right Base Cover
onto the Right Upright (85).
91
85
84
88
7
8. Remove the tie from the indicated bracket on
the Right Handrail (83). If necessary, press the
5/16" Cage Nuts (38) back into place.
Slide the Right Upright Cover (86) onto the
Right Upright (85), and slide a Handrail Cap (81)
onto the Right Handrail (83). Orient the Cover
and the Cap as shown.
Hold the Right Handrail (83) near the Right
Upright (85). Insert the Upright Wire (87)
through the indicated bracket on the Right
Handrail. Pull the Upright Wire out of the end of
the Right Handrail.
Position the Right Upright Cover (86) as
shown.
Attach the Right Handrail (83) to the
Right Upright (85) with two 5/16" x 1" Flat Head
Patch Bolts (3), a 5/16" x 1" Patch Bolt (4) with
a 5/16" Star Washer (13), and two #8 x 3/4"
Screws (1).
Do not tighten the Patch Bolts or
Screws yet.
Attach the Left Handrail (not shown) in the
same way.
Note: There is no wire on the left
side.
38
83
Bracket
3
4
13
86
85
1
81
87
8
Summary of Contents for 850 T PFTL63609.1
Page 29: ...29 NOTES...
