8
6
6. While another person holds the Upright (13)
near the Frame (1), connect the Extension Wire
(23) to the Reed Switch Wire (39). Then, insert
the excess wire downward into the Frame.
Insert the Upright (13) into the Frame (1).
Tip: Avoid pinching the wires.
Attach the
Upright (13) with three M8 x 15mm Button
Screws (34) and three M8 Split Washers (42).
Avoid pinching
the wires
34
39
42
34
23
13
1
42
5. Loosen and remove the Seat Post Knob (9)
from the Frame (1).
Insert the Seat Post (5) into the Frame (1).
Adjust the Seat Post to the desired height and
insert the Seat Post Knob through the indicated
hole in the Frame into one of the adjustment
holes in the Seat Post. Then, tighten the Seat
Post Knob.
Make sure the Seat Post Knob is
firmly engaged in one of the adjustment
holes in the Seat Post.
5
5
1
9
Hole
Adjustment
Holes
All manuals and user guides at all-guides.com
