12
14. Insert the right Pedal Arm (14) into the right
Upper Body Leg Bracket (21).
Attach the right Pedal Arm (14) to the right
Upper Body Leg Bracket (21) with two M6 x
28mm Flat Head Bolts (31) and two M6
Locknuts (77).
Make sure that the Locknuts
are inside the hexagonal holes.
Repeat this step for the left side of the ellip-
tical exerciser.
15.
See step 3.
Tighten the four M10 x 20mm Patch Screws (79).
Tip: Tighten the two Patch Screws on the
front of the elliptical exerciser before tightening the other two Patch Screws.
16.
Make sure that all parts of the elliptical exerciser are properly tightened.
Note: Some hardware may be
left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the
elliptical exerciser.
14
21
6
14
77
31
Hexagonal
Holes
Summary of Contents for 380 Razor PFEVEL74008.0
Page 24: ...24 NOTES...
