22
MAINTENANCE
Regular maintenance is important for optimal
performance and to reduce wear. Inspect and properly
tighten all parts each time the exercise bike is used.
Replace any worn parts immediately.
To clean the exercise bike, use a damp cloth and a
small amount of mild soap. IMPORTANT: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
CONSOLE TROUBLESHOOTING
If the console does not turn on, make sure that the
power adapter is fully plugged in. If there are exterior
wires on the console, make sure that the connectors
on the wires are oriented correctly and are connected
firmly to the receptacles in the console.
If the console does not display your heart rate when
you use the handgrip heart rate monitor, see step 5 on
page 16.
If lines appear in the console display, see HOW TO
CHANGE CONSOLE SETTINGS on page 21 and
adjust the contrast level of the display.
If a replacement power adapter is needed, call the
telephone number on the cover of this manual.
IMPORTANT: To avoid damaging the console, use
only a manufacturer-supplied regulated power
adapter.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, first unplug the power adapter.
Next, remove the indicated M4 x 20mm Screw (2) and
the Upright Cover (9). Then, use a standard screw-
driver to carefully remove the Shield Cover (26).
Next, locate the
Reed Switch (20).
Rotate the Pulley
(55) until a Magnet
(54) is aligned with
the Reed Switch.
Next, slightly
loosen the two
M4 x 20mm
Screws (2), slide
the Reed Switch
(20) slightly
toward or away
from the Magnet (54), and then retighten the Screws.
Plug in the power adapter and rotate the Pulley (55)
for a moment. Repeat these actions until the console
displays correct feedback. When the reed switch is
correctly adjusted, reattach the parts that you removed.
26
2
9
54
20
55
2
MAINTENANCE AND TROUBLESHOOTING
