background image

18

HOW TO USE AN IFIT WORKOUT

iFit cards are available separately. To purchase iFit

cards, go to www.iFit.com or see the front cover of this

manual. iFit cards are also available at select stores.

1. Turn on the console.

To turn on the console, press any button or begin

pedaling. The display will light and the console will

be ready for use.

2. Insert an iFit card and select a workout.

To use an iFit workout, insert an iFit card into the

iFit slot; make sure that the iFit card is oriented so

the metal contacts are face-down and are facing

the slot. When the iFit card is properly inserted,

the indicator next to the slot will light and words

will appear in the display.

Next, select the desired workout on the iFit card

by pressing the up and down buttons next to the

iFit slot.

Press the Start button or begin pedaling to start

your workout. iFit workouts function in the same

way as trainer workouts. To use the workout, see

steps 3 to 5 on page 16.

3. When you are finished exercising, remove the

iFit card.

Remove the iFit card when you are finished exer-

cising. Store the iFit card in a secure place.

THE INFORMATION MODE

The console features an information mode that allows

you to select a unit of measurement for the console

and to view usage information for the exercise cycle.

To select the information mode, press and hold down

the Workout button for a few seconds.

The display will show the

selected unit of measure-

ment. An “E” for English

miles or an “M” for metric

kilometers will appear in

the display. To change the

unit of measurement,

press the Start button

repeatedly to select the

desired unit of measure-

ment. Note: When you

replace the batteries, it

may be necessary to rese-

lect the unit of

measurement.

The display will also show the total distance pedaled

since the exercise cycle was purchased and the total

number of hours the exercise cycle has been used.

The total distance pedaled will appear in the first sec-

tion of the display. The total number of hours the

exercise cycle has been used will appear in the third

section of the display.

To exit the information mode, press the Workout but-

ton.

iFit Slot

iFit Card

Summary of Contents for 280 Re Bike

























Reviews: