Step 4: Install the Meter.
Feed the Pulse Sensor Wires (32) (IF WITH PULSE) and Upper Sensor Wire (30) through hole of the
Bracket (33), and then connect the Wires to the Meter (10) respectively.
Insert the Bracket onto the Handlebar Post (4), fix the Computer onto the Bracket.
(Please follow the same way with the OPTIONAL METER)
Step 5: Install the Saddle and Seat Post.
Place the Saddle (6) over the Seat Post (7), secure in place with the Flat Washers (38) and Nylon Nuts (23)
which are pre-attached to the Saddle.
Slide the Expansion Sleeve (8) onto the Seat Post, then insert the Seat Post into the Main Section, adjust
to a proper position, secure in place with the Locking Knob (25).
10
Summary of Contents for Magnetic Cycle
Page 5: ...5...
