Pro Fitness 382/1176, Assembly & User Instructions

Page: 27 / 36

1. Hold the end caps to lift the running deck, make
sure you hear the sound of the deck locking into
position.
2. Hold the end caps, touch the joint with your
tiptoes to unfold it.
3. The treadmill has three manual incline positions.
Lift up the running deck and adjust the bracket to
the desired incline and then return the running
deck back to floor.
Warning!

A folded treadmill should not be operated.

Allow the running surface to come to a
complete stop before folding.

Allow the running surface to come to a complete
stop before folding.
Check Solution
E00 Safety Key not in the position Re-locate the safety key in the correct position
E01
No signal to Controller from
console A: Check the Main Controller Wire
B: Replace the PCB Board
E02 Motor communication error
A: Check the wire from motor to controller
B: IGBT breakdown, Replace the controller
C: Check the power voltage if 50% lower than rate
voltage
D: repace the motor wire or change motor
E04 Incline Motor communication error A: Check the wire from incline motor to controller
B: Replace the incline motor
C: Replace the controller
E05 Over current protector A: Over loading or over resistance, restart the
treadmill
B: Transmission parts seized up, check the parts
C: Replace controller
D: Motor breakdown, change the motor
E06 Motor Open Circuit Connect the Motor link
E08 IC Driver Error Replace the IC driver or change the IC driver
E09 Folding up protect A: Do not fold up the running deck when treadmill in is
running
B: If the running deck in laying position and show E09,
you need change the contoller
E10 Motor instantaneous current
abnormal A: Adjust the torsion potentiometer of the Controller to
lower
B: Motor Breakdown, change the motor
E11 Over voltage protector Voltage over 270v (for 220v) or 150v (for 110v) -- turn
off the treadmill and check the power source
E13 No singnal to console from
Controller A: Check the Main Controller Wire
B: Change the controller
E14 Lower voltage protector Voltage lower than 160v (220v) or 70v (110v) -- turn off
the treadmill and check the power source
Maintenance
Trouble Shooting
26
Folding Mechanism and Lock System