23
Installation
E
ngl
is
h
Removal Procedure
Removing from Display Module
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
• Remove all power from the device before removing any covers or elements of
the system, and prior to installing or removing any accessories, hardware, or
cables.
• Unplug the power cable from both the Display Module and the power supply.
• Always use a properly rated voltage sensing device to confirm power is off.
• Replace and secure all covers or elements of the system before applying
power to the Display Module.
Failure to follow these instructions will result in death or serious injury.
NOTICE
EQUIPMENT DAMAGE
When this product is mounted vertically, first remove the Display Module from
the panel, then remove the Box Module from the Display Module.
Failure to follow the instruction can result in equipment damage.
Step
Action
1
When mounting this product vertically, remove the Display Module
from the panel and place the Display Module on a clean and level
surface with the screen facing down.
NOTE :
Refer to the SP5000 Series Hardware Manual or the SP5000 Series
(Display Module) Installation Guide on how to remove the Display Module from
the panel.
Summary of Contents for SP5000 Series
Page 1: ......
Page 31: ...32 English blank_page...
