20
E
ngl
is
h
Installation
Installation Procedure
Installing onto Display Module
Be aware of the following when building this product into an end-use product:
• This product is not approved as an enclosure. When building this product into an
end-use product, be sure to use an enclosure that satisfies standards as the end-
use product’s overall enclosure.
• This product must be used indoors only.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
• Remove all power from the device before removing any covers or elements of
the system, and prior to installing or removing any accessories, hardware, or
cables.
• Unplug the power cable from both the Display Module and the power supply.
• Always use a properly rated voltage sensing device to confirm power is off.
• Replace and secure all covers or elements of the system before applying
power to the Display Module.
Failure to follow these instructions will result in death or serious injury.
NOTICE
EQUIPMENT DAMAGE
• When mounting this product vertically, first install the Box Module onto the
Display Module before attaching the Display Module to the panel. When
installing the Box Module onto the Display Module, place the Display Module
on a clean and level surface with the screen facing downward.
• Only qualified personnel can change the primary battery.
Failure to follow the instruction can result in equipment damage.
Summary of Contents for SP5000 Series
Page 1: ......
Page 31: ...32 English blank_page...
