IDE HDD Auto-Detection
[Press Enter]
IDE Secondary Master
[Auto]
Access Mode
[Auto]
Capacity
0 MB
Cylinder
0
Head
0
Precomp
0
Landing Zone
0
Sector
0
↑↓→←
:
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Phoenix- AwardBIOS CMOS Setup Utility
IDE Secondary Master
Item Help
Menu Level
To auto-detect the
HDD's size, head...on
this channel
6)
Confirm whether "AUTO" is selected for both [IDE Secondary Master] and
[Access Mode]. If AUTO is not selected, change these settings to AUTO.
If AUTO is selected in both, disk parameters will be automatically read
when the PS-B is turned ON. The factory setting is AUTO and recom-
mended for most users.
7)
After all changes are made, press the [ESC] key and select [Save & Exit
Setup] to save the settings.
© 2002 Digital Electronics Corporation All rights reserved.
Note
Please be aware that Digital Electronics Corporation shall not be held
liable by the user for any damages, losses, or third party claims arising
from the uses of this product.
Digital Electronics Corporation
8-2-52 Nanko Higashi, Suminoe-ku, Osaka 559-0031, Japan
URL: http://www.pro-face.com/
